SS 20 RP Trailer Specs
“Thoroughbred Walk-Thru Model”
With Rear Ramp and Doors Above
 

 

Colors and extra features may not be accurate

The 2-horse, SS 20 RP is a thoroughbred walk-through model with a full width, spring loaded rear ramp with two doors, windows and bars above. The Event SS 20 RP is a straight load trailer with one walk out escape door with windows on each side. This trailer also has two padded bars per stall with two locations, allowing a comfortable ride for your horses.

Specifications

.063 white pre-painted baked on enamel exterior finish
1 5/8” x 3” side posts (one of the heaviest in the industry)
Aluminum V-hitch with 2 5/16” coupler, 5000# top wind jack, breakaway switch with battery, and safety chains with slip hooks
Two 3500# rubber torsion axles with electric brakes
Four 15” 6-hole steel modular wheels
Four ST225/75R15 radial tires
Spare tire carrier
One dome light in dressing room and two in horse area
One wall switch in dressing room to run all dome lights
Lifetime rubber floor mat in horse area
One pop-up aluminum roof vent per horse
Full-width spring-loaded rear ramp with two doors, windows, and bars above
One escape door with windows on each side
One camper door with window, deadbolt and screen door
Two 18” x 24” nose windows
Two 18” x 48” windows with bars and screens in horse area
Solid roof to floor wall seperating horse area from dressing room
18” x 48” bulk head window in solid wall
Two padded bars per stall (with two locations)
One 7’ stall divider with body and shoulder separator
.100 aluminum up 48” walls in horse area with white .040 lining above (lined to roof)
6 mm rubber up 48” on walls in horse area
One saddle rack per horse in dressing room
One outside tie ring per horse
Two inside tie rings per horse
Two halter hook bars, one blanket bar, one brush tray, and one clothes rod
Turf on floor in dressing room
Side walls in horse area are insulated
7’6” inside height
7’ width